Eno Scientific’s permanent water level sensors are easily installed, externally on the well, nothing breaks the seal of the well making them the easiest retrofit on the market. The Well Watch Series sensors provide real time, on site data and most boast the ability to communicate with an telemetry or SCADA system.
The Well Watch 660 Series water level indicators with Sonic Sense technology uses low frequency sound waves to provide continuously updated, accurate water level measurements even around partial obstructions in the well, down to 120 metres. As this sensor does not need to be lowered into the well, it is perfect for potable, contaminated or caustic wells. The optional wireless 310 Remote Display with built in data logger is capable of storing 25 million time/date stamped log points.
The Well Watch 670 water level indicator with Sonic Sense technology uses low frequency sound waves to provide continuously updated and accurate water measurements for ground water management. This sensor is able to measure water level within your average well, but is also capable of accurately measuring water level in pies or wells with a ben or in wells with obstruction. It can measure water depth from 3 to 1200 metres within an accuracy of 3cm. The optional wireless 310 Remote Display with built in data logger is capable of storing 25 million time/date stamped log points. There is also the option for telemetry to be combined with this sensor to allow for simple and easy data transfer and management.
The Well Watch 700 uses versatile sound waves capable of travelling past obstructions, installed well equipment and around corners to determine the water level within the well. The 700 is able to measure water level to a depth of 2100 metres in wells with a diameter up to 30″ (~80cm). this sensor can also be coupled with telemetry systems to allow for simple data transfer and management.