Description

The AP-2000 is the smaller of the Aquaread portable multiparameter water monitoring probes. It comes with a range of pre-fitted standard sensors that includes pH, ORP, Conductivity, TDS, SSG, Resistivity, Salinity, Dissolved Oxygen and Temperature.
The AP-2000-D adds a depth sensor to the probe.
The factory installed and fully calibrated optical DO sensor requires little maintenance, gives stable readings and requires cap changes only once every 2-3 years.

Both the AP-2000 and the AP-2000-D come with two empty Aux sockets pre-fitted with removable blanking plugs. These sockets allow you to customise your probe by adding in additional sensors.
Aux port 1 can be fitted with either an optical sensor or an ion selective sensor (ISE).
Aux port 2 can be fitted with only an ISE sensor.

The probes are constructed from tough marine grade aluminium that has been hard anodised, making it suitable for use in both fresh and salt waters.

The probe can be used with a variety of cable lengths via the AquaConn Connectors. Cables are available in 3m, 10m, 20m and 30m lengths as standard.
All 20m and 30m cables come on a winding reel making them much easier to operate, especially when profiling.

The AP-2000 and AP-2000-D packages comes complete with Aquaprobe, GPS Aquameter, 3m cable, rugged case and accessories.

The GPS Aquameter is a handheld water quality meter with built in GPS. The built in GPS receiver allows the meter to record the location of every dataset, meaning you will always know where your data was captured.
The AquaLink software is free to download and can be used to download recorded data from the Aquameter, for analysis, reporting and google map creation.