Description
The hollow sub slab vapour sampling point is designed to be installed into a 16 mm diameter hole through a concrete slab. It protrudes out the bottom of the slab to allow vapours to be drawn up through its middle.
The vapour sampling points are inserted into position using a silicon sleeve. This forms a seal between the slab and the vapour sampling point. A push on cap keeps it sealed off when not in use.
The sampling points can be extracted and reused.
The stainless-steel cover covers the hole allowing people to walk on or small vehicles to drive over it.
Items may be purchased separately or in a kit.
Kit 1 – with Installation Tools
Complete in a small toolbox, includes:
10 x Stainless Steel Vapour Point Consumables
10 x Stainless Steel Cover for Vapour Sampling Point
1 x Slab Vapor Pin Silicon Sleeves, Pack of 10
1 x Temporary Plastic Covers, Pack of 10
1 x Push-on cap for Vapour Sampling Point, Pack of 10
Installation Tools
1 x Stainless Steel Drilling Guide
1 x Installation / Extraction tool
1 x Spanner for Metal Covers
Kit 2 – without Installation Tools
Complete in a small toolbox, includes:
10 x Stainless Steel Vapour Point Consumables
10 x Stainless Steel Cover for Vapour Sampling Point
1 x Slab Vapor Pin Silicon Sleeves, Pack of 10
1 x Temporary Plastic Covers, Pack of 10
1 x Push-on cap for Vapour Sampling Point, Pack of 10