Description

The AP-7000 Aquaprobe is the largest multiparameter water quality probe from Aquaread. The AP-7000 allows you to add up to 6 additional sensors alongside the standard parameters that includes pH, ORP, Conductivity, TDS, SSG, Resistivity, Salinity, Dissolved Oxygen, Depth and Temperature.
All Aquaprobes are made with marine grade aluminium, finished in black with hard anodising for excellent corrosion and biofouling resistance.

The AP-7000 comes with six empty Aux sockets pre-fitted with removable blanking plugs. These sockets allow you to customise your probe by adding in additional sensors. Each socket can house either an Ion Selective Sensor (ISE) or any of the optical sensors.
Cables are available in standard 10m, 20m and 30m lengths. All cables 20m and longer come on a winding reel making them much easier to operate, especially when profiling.

The AP-7000 probe is designed for long periods of unmanned monitoring, facilitated by the integral self-cleaning system that cleans all sensors installed on the probe. The wiper arm is designed to be easily removed for quick and simple brush replacement in the field.
The wiper cleaning frequency can be configured when used with an Aqualogger. When used with a telemetry system the wiper will run every 6 hours to reduce battery drain.

The GPS Aquameter is a handheld device with a display for live data viewing and data recording. Data can be downloaded into the AquaLink software. GPS coordinates are recorded every time you take a reading and can be plotted in Google Earth.

You can connect the AP-7000 direct to a PC Via the Aquaprobe PC-KIT’s USB interface. Using the provided software you can take live readings, log data direct to your hard drive and calibrate probes with fully recorded calibration reports. Telemetry options are available.